Custom Solar Battery Cover

Custom-Size Solar Battery Cover – Choose Your Depth, Height & Width

Pick your own size to suit your install. 

Got a Sigenergy, Sungrow, GoodWe or BYD battery? Check our standard covers already sized. 

Questions? Call Zach on 0423 575 095 or email info@secovers.com.au for a fast response.

How to Size Your Cover

Rule of thumb: allow at least 100mm clearance at the front and on each side of your battery.

1. Measure your battery: height, width and depth, including any stacked modules, isolators or conduit that will sit under the cover.

2. Width: battery width + 200mm (100mm each side). Choose the next width up.

3. Depth: battery depth + 100mm at the front. Choose the next depth up.

4. Height: choose the next height up from your battery, leaving room for any cabling above it.

5. Check your battery's installation manual. If the manufacturer specifies larger clearances, theirs apply.

Example: a battery 680mm wide × 1080mm high × 260mm deep needs a 900mm wide (680 + 200 = 880), 400mm deep (260 + 100 = 360), 1.19m high cover.

Not sure or need a custom cover? Email a photo of your battery and its model to info@secovers.com.au and we'll help you out.

Available Sizes

• Depth: 400mm or 500mm

• Height: 1.0m, 1.19m or 1.49m

• Width (At rear): 900mm, 1000mm, 1100mm or 1200mm

All sizes are internal dimensions.

Need a size outside this range, an extension for a stacked system or a fully custom design? Contact us for a quote.

Finish & Colour Options

Standard (included): Dulux Protexture in Surfmist

• Flat, textured finish for a premium look

• Highly mar and scuff resistant, showing far less visible wear than smooth powder coats

• Very good corrosion resistance

• 15-year Dulux aluminium durability and colour warranty*

Upgrade options

• Other Protexture colours (e.g. Monument, Basalt, Shale Grey, Dark Bronze, Black): typically +$60

• Dulux Duralloy (standard smooth finish) in a wide range of colours: typically +$60

• Ultra-premium Dulux Duratec textured finish: price on request

Add your custom colour to the cart. Colour availability is confirmed before production, and we'll contact you about any colour charge before we start.

*Dulux warranty terms and conditions apply.

Optional Bottom Mount Bracket

Bolts to your concrete slab or pad and helps to carry the weight of the cover, taking load off the wall fixings. $15, add as a separate product. 

Built for Australian Conditions

• 2.5mm marine-grade 5005 aluminium, a robust alternative to plastic or thin-sheet covers

• Shields your battery from direct sun, rain, dust and knocks

• Ventilated side panels allow passive airflow. This is a ventilated cover, not a sealed enclosure

• Gives your install a clean, finished look

• Designed and manufactured in Brisbane

Easy Installation

• Flat-pack, precision laser-cut kit: 5 pieces (2 × side, front, top panel, top mount bracket)

• Assembles with basic tools (spanner + Allen key)

• Keyhole wall mounting: 5–7 mounting points with 2 screws each, depending on size

• Lifts off easily for servicing and access

• Suits DIY, solar installers, electricians and retrofits

Order Information

• Made to order in Brisbane. Typical production time is 2–4 weeks

• Ships flat-packed Australia-wide

• Questions on sizing or finishes? Call 0423 575 095 or email info@secovers.com.au

Suits Most Australian Home Batteries

Our covers are used with a wide range of residential battery systems, including:

• Tesla Powerwall

• BYD (HVS / HVM)

• Sungrow (SBR / SBH)

• GoodWe (LX / U Series)

• SolaX (T-Bat / T-HS)

• SolarEdge batteries

• Alpha ESS

• Sigenergy (SigenStor)

This list is a guide only and does not confirm suitability. Final sizing, clearances and installation must be verified by the installer in accordance with the manufacturer's specifications.

Important Installation & Clearance Requirements

Solar Equipment Covers (SE Covers) are designed to provide external protection from environmental exposure such as sun and weather while allowing for airflow around the equipment. These products are not designed to enclose, seal, or thermally insulate battery or inverter systems.

All covers must be installed in accordance with:

• The equipment manufacturer's installation requirements

• Minimum clearance and ventilation specifications

• SE Covers installation guidelines

It is the responsibility of the installer and/or purchaser to:

• Confirm correct sizing and internal fitment prior to installation

• Ensure adequate airflow and heat dissipation is maintained at all times

• Verify all manufacturer clearance requirements are met

• Determine suitability of the product for the specific installation

Improper installation, restricted airflow, or failure to comply with manufacturer requirements may result in reduced performance, equipment damage, overheating, or voiding of manufacturer warranties.

SE Covers makes no representation or warranty regarding:

• Compatibility with specific battery or inverter systems

• Compliance with individual manufacturer warranty conditions

• Performance of equipment once installed with a cover

SE Covers accepts no liability for any loss, damage, or failure arising from:

• Incorrect product selection

• Improper installation or use

• Modification of the product

• Failure to follow manufacturer or installation requirements

If you are unsure about suitability, consult your installer or equipment manufacturer prior to purchase and installation.